By: buttersc

buttersc — Fri, 04 Sep 2009 03:46:24 +0000

You will probably have people try to tell you to put a lighter up to it, and if it does not turn black, than it is real…..if this happens, PLEASE don’t do that…..it WILL turn black, even if it is real gold(I had some things get burned in a fire, and the gold was black, to say the least).
If the chain is stamped 14k, than it is real gold.
Items that are fake will NOT be stamped.
Real gold is ALWAYS stamped with what karat it is….ie: 14k, 18k….etc.
So, from the sound of it, your figaro chain is real gold

By: snezana9

snezana9 — Fri, 04 Sep 2009 01:12:50 +0000

If it’s real gold, you will be able to a lighter up to it and it should’nt go black.

By: shabocon

shabocon — Thu, 03 Sep 2009 21:38:02 +0000

We are going to hope that the 14k on your piece does actually mean that it is solid 14k gold. However, I am just a little suspicious only because there is no maker’s mark accompanying your 14k stamp.
The lack of a hallmark (10k, 14k, 18k etc.) is not indicative of whether your piece is gold or not. In the United States it is against the FTC’s regulations for the jeweler to hallmark a piece of jewelry unless it is accompanied by a maker’s mark. So, when I first began making jewelry and did not have a trademark of my own, I did not hallmark my jewelry. Now that I have a maker’s mark, I hallmark my jewelry with the appropriate metal hallmark and my maker’s mark.
Do NOT hold a lighter to your gold. Having torch-soldered a lot of gold, I can tell you that the heat from fire WILL change your gold’s appearance. If this happens, you’ll have to go through a professional pickling, cleaning and polishing to bring the color back to what it was.
A jeweler cannot just look at a piece and tell you for certain whether it is gold or not; the jeweler will do a test to determine it.
To be scientfically accurate a sample of the metal in question must be assayed in a testing laboratory, but the following two tests have been used for many years and often are sufficiently accurate for a craftsperson or the owner of the metal in question.
To answer “Is It Gold?”:
With a small file, make a scratch in an inconspicuous spot. While wearing rubber gloves, use a wooden, glass or plastic stick to apply a drop of nitric acid to the filed spot. Observe the reaction. When done, rinse everything well in running water.
If there is no reaction, it’s gold.
If there’s a bright green reaction, it’s base metal.
If there’s green in the scratch, it’s a gold layer over base metal (goldplate).
If there’s a milky reaction in the scratch, it’s a gold layer over silver.
To answer “What Karat Is It?”
Determining karat requires a testing kit containing nitric acid, aqua regia, samples of known karat, and a touchstone of slate or ceramic.
The gold object to be tested is rubbed on the stone (“touched”) to leave a streak. A parallel line is made with one of the test pieces of known karat. Both marks are flooded with acid and the reaction are observed. When the sample colors at the same rate as the test streak, a match has been made. Nitric acid is used for low karat golds; aqua regia is needed for higher karats.
Please note: these tests are for your information only. They are not accurate enough to rely upon when representing a piece for sale. Most jewelers have testing kits to use when determining if something is gold or not and its approximate karat. It is probably easiest to take the item to a jeweler than to set up the testing kits yourself

Comments on: How Do I Know If Its Solid Gold Or Gold Plated?

By: buttersc

By: snezana9

By: shabocon